home
why use Brantho-Korrux?
areas of application
contact us
 
 
 
 
 
 

 

Product range

'3 in 1'
Unique one component semi-gloss coating made up from a blend of polyester resins. '3 in 1' acts as primer, undercoat and topcoat which can be applied on practically all types of substrate. Excellent resistance properties against abrasion and weathering.
Higher gloss levels can be supplied if required.
Brantho-Korrux '3 in 1' meets the requirements of EN ISO 12944

!!! New RAL Colours for Watermarks
!!!
Brantho Korrux '3 in 1' RAL 3028, Pure Red, and
RAL 6037, Pure Green, can be supplied as part of the standard colour range. These high visibility colours have excellent resistance to UV degradation. RAL 3028 and RAL 6037 are recommended
by IALA (E-108: Surface Colours used as Visual Signals on Aids to Navigation, Dec 2009) read more ...
Technical Datasheet
Health and Safety Datasheet

Klaar-Lack
'3 in 1' without any colour pigments.
Used on timber structures to provide an anti-graffiti coating but still keeping the natural wood colour. It dries to a semi-gloss 'varnish' type of finish and any graffiti can be removed with 'Kombi Thinners'. This product is often used with 'Anti-Slip 300 Additive' to create an anti-slip finish (timber bridges, play equipment, decking, stairs treads, floors, etc)

Technical Datasheet same as for "3 in 1"
Health and Safety Datasheet same as for "3 in 1"

Glitter Silver 096
Silver coloured variation of '3 in 1' producing a light reflecting finish. Glitter Silver 096 is used on bollards, barriers and other objects that need to light reflecting. (Also available in Gold, Green, Blue and Copper colours)
Technical Datasheet same as for "3 in 1"
Health and Safety Datasheet same as for "3 in 1"

Rust Primer
High build primer and filler for use on very rough surfaces. Lead free.
Technical Datasheet
Health and Safety Datasheet

Adhesion Primer
Special primer giving extra adhesion for coatings applied to very smooth surfaces in harsh environments.
Technical Datasheet
Health and Safety Datasheet

Mould Stop
Similar formulation as '3 in 1' with additive of pure silver as anti-mould component. Good green algae resistance. Contains no anti-mould chemicals.
Technical Datasheet same as for "3 in 1"
Health and Safety Datasheet same as for "3 in 1"

2-Kompo 'Anti-Graffic'
Two-component epoxy offering very fast curing. Branth's 2-Kompo "Anti-Graffic" is a high gloss coating showing excellent gloss retention and chemical resistance; it cures to a tough, enamel-like finish which is very easy to clean.
Technical Datasheet
Health and Safety Datasheet

Ecopakt
Practically solvent free water-based coating. Excellent filling properties and hiding power. Rapid drying time, good adhesion, odourless.
Technical Datasheet
Health and Safety Datasheet

Basak
Water-based non-leaching mould resistant coatings especially designed for exterior and interior walls and ceilings. Very low odour, water repellant and U.V. resistant. Used as primer and topcoat for mineral substrates.
Technical Datasheet
Health and Safety Datasheet

Anti-Slip 300 Additive
Thermally split flint stones. Added to or sprinkled on floor coatings to produce an anti-slip surface.
Product Datasheet

Multiclean
Bio-degradable water-based cleaner/degreaser which can be used everywhere as it is non-toxic, non-corrosive and non-flammable. Substrates cleaned with Multiclean do not need to be rinsed off with water before applying coatings.
Technical Datasheet
Health and Safety Datasheet

Registered in Edinburgh No. 318745